The Bandito Panther Series Spearguns have very very few breakdowns. But just in case you need a part, here they are.

3226-BB Panther Series Safety Ball Bearing. Stainless Steel. One required. Positioned on the safety spring to make the safety move smooth and hold in place. Made in The USA

3226-LR Panther Series Line Release. Made with top grade stainless steel. One required.

3226-Pin Panther Series Pin. Used to hold the trigger, sear, and line release in the speargun. 3 required. Stainless steel.

3226-S Panther Series Safety slider. Made from the same composite material as the speargun. One required.

3226-Sear Panther Series Sear. This is the part that releases the speargun shaft when the trigger is pulled. Made with top grade stainless steel. One required.

3226-SSpring Panther Series Safety Spring. Stainless steel. One required

3226-Trigger Panther Series Trigger. Made from top grade stainless steel. One required.

3226-TSpring Panther Series Trigger Spring. Stainless steel. One required.

3226-U Panther Series U-Housing. Holds the shaft on the sear. One required.

3236-0 Panther Series Shaft. 36” x 5/16” Used with the Bandito Panther II speargun. Made with top grade stainless steel. Slotted Shaft for two speargun bands with wire wishbones. Made in The USA

3260 Panther Series Shaft. 30” x 5/16” Used with the Bandito Panther I speargun. Made with top grade stainless steel. Slotted Shaft for two speargun bands with wire wishbones. Made in The USA

3274 Panther Series Gun Butt. Over sized rubber gun butt fits the Bandito Panther Series spearguns and other Bandito Aluminum tube guns with the Aluminum sleeve on the butt end of the speargun. Click HERE to view pictures and for more information.

3374 Speargun Band 14“ x 9/16” (14mm) Yellow rings, black rubber. Our speargun bands are measured from the tip of each end of the rubber tubing. Color coded rings are used to make it easy to replace the bands and keep them organized. This band will fit the Standard Series Bonito and the Panther I Spearguns. The Bandito Brand speargun bands are made using top quality rubber and stainless steel wishbones. ½” and 9/16” diameters come in black. 5/8” diameter comes in black, blue, and yellow. ¾” diameter comes in black. Made in The USA

3378 Speargun Band 18“ x 9/16” (14mm) Red rings, black rubber. Our speargun bands are measured from the tip of each end of the rubber tubing. Color coded rings are used to make it easy to replace the bands and keep them organized.This band will fit the Standard Series Barracuda and the Panther II Spearguns. The Bandito Brand speargun bands are made using top quality rubber and stainless steel wishbones. ½” and 9/16” diameters come in black. 5/8” diameter comes in black, blue, and yellow. ¾” diameter comes in black. Made in The USA

3460 Bandito Double Barb Spear Tip. Stainless steel, Standard 6mm tapped hole fits any standard 6mm threaded spear end.

3361 Bandito Replacement Shock Cord. Used on the Bandito Standard Series and Panther Series spearguns to attach the shaft to the muzzle. 16 foot long, blue, 200# test, nylon cord with a black rubber bungee for shock absorption that helps keep the shaft from ripping out of the fish and to help prevent shock cord breakage when a shot is missed. Simply tie the shock cord where the old one used to be  and cut off the excess. Made in The USA

G-12-WSAT Bandito Speargun Warning Sticker.

G-14 Bandito Speargun 5/16” Slide Ring. The Slide Ring has a 5/16” inside diameter and is used as an attachment point for the shock cord. Fits the Bandito Standard Series.

G-15 Bandito Speargun 3/8” Slide Ring. The Slide Ring has a 3/8” inside diameter and is used as an attachment point for the shock cord. Fits the Bandito Standard Series.

Z3226B Bandito Panther I Body. Used as a replacement in case you run over your Panther speargun with a cement truck. Made in The USA

Z3236B Bandito Panther II Body. Used as a replacement in case you break your Bandito Panther speargun. Made in The USA